Termination Instructions for Standard 8 Position C5E Modular Plugs

Cut rows of wires wile holding in proper wiring configuration as illustrated below. Insert bottom row of wires into the management configuration at the open end of the plug.
Push the cable firmly into the plug using a slight twisting action maintaining configuration of the wires until the connectors seat fully into the plug.
Inspect the conductor positioning by viewing their position looking from the side of the connector, insuring the front of the conductors are past the points of the contacts directly above the conductors.
After wires are loaded into their proper positions in the connector, insert the connector into the proper termination tool.
Terminate the assembly and inspect product to insure no damage has occurred.

Conductor Positions (Connector Tab Down, Positions From Left to Right)
Position	T568A Wiring	T568B Wiring
One	White/Green	White/Orange
Two	Green	Orange
Three	White/Orange	White/Green
Four	Blue	Blue
Five	White/Blue	White/Blue
Six	Orange	Green
Seven	White/Brown	White/Brown
Eight	Brown	Brown